Hi again same vehicles the 06 exterior facelift vehicles, do they need the new wings as when I put the part number in for the new wings it says 06-12? Thanks!!!

Hi Matt, Looking at a newer ff, and I have been offered a great dal on an 06 td6 or and 06 4.2 supercharged on lpg(from research hen cruising they will cost about the same to run?) anyway what I wanted to know is as these have Bothe had the exterior facelift but not the interior is the wire tank the new design so the brackets don't need to be fabricated do you know so you get the flush finish? Cheers!

going to give this a go got one with an amp for £30 delivered - looks like there is one more if someone else fancies it. iinreckon it should be a piece of cake as i downgraded from dsp to non dsp amp which runs with line level outputs so should be able to T into those! will let you know how i get on!

i have just got an exterior design rear bumper. (genuine) had the exhaust teims sand blasted and powder coated and the bumper painted. before fitting i wonder if anyone can tell me if the pdc plug at the end of the loom is the same for 02-05 as 05+ so i dont have to cut and join each sensor individually... cheers!

hi all - this is probably for Matt.. so you know we hbe the 2010 facelift but the sdaptive lights dont work? could this be configured to work with the hateway module now? i was just thunking that the last 06/07 td6’s were fscelifted and had this feature?

hi Matt... you know the black plastic the step sits in - does this detatch at all? i was thinking of removing and attatching some 15mm box section then attatching onto thos thus removing the gap... would that work?

hi matt - lookong at doing this bit curious as to what in that big pile of stuff you actually used or is different? inwas loooing at headlining and pillars next to windscreen and the pillars which hold driver and passenger seatbelts do i need any more to make it look right?

Hi Matt - great guuide btw couple of questions, How long did it take you to fit? Looks a lot of work but I'm committed now! Is it possible to relocate or retrofit the reservoir from the 07?